Unitech Network Card 103 User Manual

Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
Unitech America, Inc &  
Summit Data Communications, Inc.  
Quick Start Guide  
for a Summit radio card or module  
with software version 1.03  
25 June 2007  
Summit Data Communications, Inc.  
i
 
Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
the features  
in CCX V3 for ASDs, go to  
l
.
Summit Client Utility (SCU) provides graphical user interface (GUI) for access to all of its functions.  
a
Access to these functions also is available through  
application programmer  
an application programming interface (API), which an  
can use to enable another utility to manage the radio.  
To initialize SCU:  
From the Star  
Select the directory called Summit  
Inside the Summit directory are two items: a directory for the storag  
SCU icon. To run SCU, double-click th SCU icon  
t
menu, select Programs  
e
of security certificates and an  
e
SCU has five windows: Main, Profile, Status, and Diags (or Troubleshooting), and Global. Tabs, which  
are shown as item 8 in Figure 1 below, enable easy navigation between windows. Each window is  
described in more detail in this section.  
Main Window  
Figure 1 below is an example of Main window:  
a
Figure1: Main window  
Step 1: Press Admin Login-  
Password: SUMMIT  
Unitech America, Inc and Summit Data Communications, Inc.  
2
 
Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
Here ar the highlights:  
e
Admin Login/Logout: To login to SCU as an adm  
Login” is display d and supply the correct admin password on the dialog box. The default password  
is “SUMMIT in all capital letters. (The password can be changed through Admin Password  
function on Global Settings window.) Once you are logged in as an administrator, clicking the  
button again ogs you out as an administrator, leaving you with access only to end-user functions.  
inistrator, you select this button when “Admin  
e
he  
l
the  
t
Enable/Disable Radio: When the radio is enabled, selecting this button disables it; when the radio is  
disabled, selecting this button enables it.  
Active Profile: You can view the name of the active profile and, using the selection list, select a  
different profile. If you select “ThirdPartyConfig” then, after the device goes through  
WZC is used for configuration of radio.  
Status: Indicates the radio’s status.  
a
power cycle,  
the  
Radio Type: Indicates the type of radio in the device. “BG” means  
a
Summit radio that supports  
802.11b and 802.11g.  
Regulatory Domain: Indicates the regulatory domain or domains for which the radio is configured.  
“Worldwide” means that the radio can be used in any domain. The domain cannot be configured by  
an administrator or user.  
Driver: Indicates the version of  
t
h
e
device driver that is running on the device.  
device.  
SCU: Indicates the version of SCU that is running on  
t
he  
About SCU: When tapped, supplies information on SCU that on Windows application normally  
a
would appear under Help | About.  
Profile Window  
Profile settings are radio and security settings that are stored in the registry as part of  
When profile is selected as the active profile on the Main window, the settings for that profile becom  
active. An administrator can define up to 20 profiles, edit them, and delete them on th  
a
configuration profile.  
a
e
e
Profile window in  
SCU. Profile changes made on the window are saved to the profile only when the Commit button is  
pressed.  
Unless it is modified, the Default profile does not specify an SSID, EAP type, or method of encryption. If  
the Default profile is the active profile, then the radio will associate only to an access point that  
broadcasts its SSID and requires no EAP type and no encryption.  
Figure 2 below is an example of Profile window:  
a
Unitech America, Inc and Summit Data Communications, Inc.  
3
 
Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
Figure 2: Profile window  
Here ar  
e
the highlights:  
Edit Profile: This is used to select the profile to be vi  
Actions: Four actions are ailable, with the first three available only to an administrator:  
New: Create a new profile with default settings and give it a uniqu name (and then change  
settings using other selections on window).  
Rename: Give the profile new nam , one that is not assigned to another profile.  
Delete: Delete the profile, provided that it is not e active profile.  
Scan: Open window that lists access points that are broadcasting their SSIDs. Each ti  
tap the Refresh button, you view an updated list of APs, with each row showing n AP’s SSID, its  
received signal strength indication (RSSI), and whether or not data encryption is in use (true or false).  
You can sort the list by clicking on th column headers. If you are authorized as an administrator,  
ewed or, if you are an administrator, edited.  
a
v
-
e
t
he  
-
-
-
a
e
t
h
a
me  
you  
a
e
select an SSID in the list, and tap Commit, you return to the Profil  
create a profile for that SSID.  
e
window to  
Radio: Radio attributes in  
current setting or an appropriate selection box with th  
right.  
the list box can be selected individually. When an attribute is selected, the  
e
current setting highlighted appears on  
the  
Security: Values for the two primary security attributes, EAP type and encryptio  
n
type, are displayed  
in separate dropdown lists, with the current values highlighted. When you as an administrator select  
an EAP type, the Credentials button appears; when you tap it, a dialog box appears that enables you  
to define authentication credentials for that EAP type. When you as an adm  
encryption ype that requires the definition of WEP k ys or pre-shared key, th  
button appears; when you ta it, a dialog box appears that enables you to define WEP keys or  
i
nistrator select an  
PSKs/WEP Keys  
PSK.  
Commit: To ensure that changes to profile settings made on the window are saved in the profile, you  
t
e
a
e
p
a
must tap the Commit button.  
Scan: To view available wireless networks  
To cause  
a
Summit radio to connect to a typical busin  
ess WLAN, you must select a profile that specifies the  
SSID, EAP  
t
ype, and ncryption yp supported by the WLAN:  
e
t
e
Unitech America, Inc and Summit Data Communications, Inc.  
4
 
Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
e
SSID: This is the name or identification of the WLAN.  
EAP type: This is the protocol used to authenticate the device and its user if the WLAN uses  
th  
Enterprise version of Wi-Fi Protected Access (WPA) and WPA2. SCU supports five EAP types:  
PEAP with EAP-MSCHAP (PEAP-MSCHAP), PEAP with EAP-GTC (PEAP-GTC), EAP-TLS,  
LEAP, and EAP-FAST  
Encryption: This specifies the type of key used to encrypt and decrypt transmitted data and how that key  
is specified or derived. Encryption options  
i
nclude:  
-
-
-
WPA2 or WPA with dynamic keys (derived from the EAP authentication process)  
WPA2 or WPA with pre-shared keys  
Static WEP keys  
Consult the user’s guide for details on all profile settings, including security settings.  
Status Window  
The Status window provides status information on the radio. A sample Status window is shown in Figur  
e
3 on  
th  
e
next page. Here are the highlights:  
Active profile  
Radio’s status  
:
Down (not recognized), Disabled, Not Associated, Associated, or [EAP type]  
Authenticated  
Client info: Nam  
AP info: Name, IP address, MAC address, bea  
Connection nfo: Channel, data rate, transmit power, signal strength, and signal quality  
e
, IP address, and MAC address  
c
on period, and DTIM interval  
i
Figure 3: Status window  
Diags Window  
A sample Diags, or troubleshooting, window is shown in Figure 4 below:  
Unitech America, Inc and Summit Data Communications, Inc.  
5
 
Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
Figure 4: Diags window, with ping active  
Here are the functions available on the Diags window:  
(Re)connect: Disable and  
and authenticate to the wireless LAN, logging all activity in the output  
Release/Renew: Obtain new IP address through DHCP release/renew, and log all activity in the  
output area at the bottom.  
Start Ping: Start a continuous ping  
its nam and function will change to Stop Ping. Moving to an SCU window other than Status or  
Diags also will stop the ping, as will Pings will continue until you tap the Stop P ng button, move to  
an SCU window other than Diags or Status, exit SCU, or remove th radio.  
Diagnostics: Attemp to (re)connect to an AP, and provide more thorough dump of data than is  
e
nable the radio, apply or reapply the current profile, and attem  
p
t
to associate  
ar  
ea at the bottom.  
a
t
o the address in the edit box next to it. Once the button is clicked,  
e
i
e
t
a
obtained with (Re)connect. The dump will include radio state, profile settings, global settings, and  
BSSID list of APs in the area.  
a
Save To...: Save the diagnostics output  
to  
a file.  
Global Window  
Global settings include:  
Radio and security settings that apply to all profiles  
Settings that apply to SCU itself  
An administrator can define and change most globa  
sample Global Settings window is shown in Figure 5 b  
l
settings on the Global Settings window in SCU. A  
low:  
e
Unitech America, Inc and Summit Data Communications, Inc.  
6
 
Uniitech America, Inc Summit Quick Start Guide  
08/23/07  
Figure 5: Global window  
The default setting for each global setting ensures reliable operation in most environments. Consult the  
user’s guide for details on all global settings.  
Unitech America, Inc and Summit Data Communications, Inc.  
7
 

Teac DVR AQ VU User Manual
Technicolor Thomson Digital Camera LDK 23hs User Manual
Technicolor Thomson Stereo Receiver DPL5000 User Manual
Texas Instruments Weather Radio SERIES 525 RAINFALL SENSORS User Manual
Toshiba Cash Register MA 1400 User Manual
Toshiba Projector TLP S200 User Manual
Traulsen Freezer RCV232WUT FHS User Manual
Tripp Lite TV Cables P568 050 P User Manual
Verbatim MP3 Player VM 205 User Manual
WatchGuard Technologies Automobile Electronics DV 1 User Manual